Petroleum Quality Institute of America

The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality and performance of lubricants in the marketplace.  Our mission is to serve the consumer of lubricants by reporting on the quality and integrity of lubricants in themarketplace.

 

Supporters

 

 

 

Trop Artic Motor Oil Synthetic Blend, API SM/GF-4, SAE 5W-30 

ConocoPhillips 

 

Purchased in: Rush Hour Foods, Laporte, IN

Date of purchase: July 14, 2011 

 

 

 

 

All tests conducted on this sample meet the specifications for API SM and ILSAC GF-4 5W-30 Engine oil.

 

 

 

 

PETROLEUM QUALITY INSTITUTE OF AMERICA

TEST PROGRAM

PHYSICAL TESTS Standard/ranges-b Average-e

Trop Artic Synthetic Blend

 TBN, mg KOH/g, (ASTM D2896) 7.4 to 9.0 8.0 7.8
 Viscosity @ 100ºC, cSt, (ASTM D445) 9.3 to 12.5 10.39 10.59
 Viscosity @ 40ºC, cSt, ASTM D445 55.0 to 82.0 60.48 62.47
 Viscosity Index (ASTM D2270) 156 to 167 163 160
 Viscosity @ -30ºC mPa s (cP) (ASTM D5293) 6,600 Max 5,793 5,380
 Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) 15 Max 13.5 12.9
ELEMENTAL ANALYSIS-c      
Additives
    Nitrogen μg/g (ASTM D-5762) 720 to 1,000 860 980
    Calcium  1,648 to 2,301 2,043 2,078
    Magnesium, ppm  6 to 43 11 9
    Phosphorus,  ppm 600 to 800 772 750
    Zinc, ppm  789 to 887 851 824
    Molybdenum,  ppm  <1 to 226 93 38
    Barium, ppm  <1 <1 0
  Additives and/or other
    Boron,  ppm  <1 to 246 84 234
    Silicon,  ppm-d  4 to 8 5 4
    Potassium, ppm  <1  <1 0
    Manganese, ppm  <1 to 8 1 0
    Titanium, ppm  <1 <1 0
    Sulfur, ppm  5,000 max 3,021 3,775
    Copper, ppm  <1  <1 0
    Sodium, ppm  <1 to 467 82 2
    Vanadium, ppm  <1 <1 0
Contaminants
    Silver, ppm  <1 <1 0
    Aluminum, ppm  <1 to 2 <1 2
    Chromium, ppm  <1 <1 0
    Iron, ppm  <1 to 1 1 0
    Nickel, ppm  <1 <1 0
    Lead, ppm  <1 to 1 <1 0
    Antimony, ppm  <1 <1 0
    Tin, ppm  4 to 5 5 0

a- Click here for product label.

b- Standards, shown in orange, are established by API, SAE and others. Ranges, shown in teal, represent the high and low data for the major brands tested.

c-Test Method for metal analysis is ASTM ASTM D5185.

d- Although silicon is used as an antifoam additive in lubricants, concentrations above 7ppm have been linked to contamination from abrasive material,

e- Average of the 10 major brands tested. Click here for brands tested.

 

 
Trop Artic Synthetic Blend  
The American Petroleum Institute sets forth a number of laboratory and engine tests required to meet an API SM performance specification. Although laboratory tests alone cannot be used to establish if an engine oil meets API SM, they can be used to determine if it doesn't.

What follows is a comparison of the test results for Trop Artic Synthetic Blend  as compared to the API SM ILSAC GF-4 requirements.

The API limits for each test are shown by the green bars. The test result for Trop Artic Synthetic Blend  are illustrated by the horizontal line.

 
Viscometrics

The viscometrics of Trop Artic Synthetic Blend  meets the required targets for a 5W-30 API SM (SAE J300 specification).











 

   
Volatility Phosphorus
The volatility of Trop Artic Synthetic Blend  meets the parameters required for an API SM ILSAC GF-4 designation.

Click here for more on Volatility.

The phosphorus content in Trop Artic Synthetic Blend  meets the requirements for an API SM ILSAC GF-4 designation.

 

 
   
 

 

 
FRONT AND BACK LABELS FROM PRODUCT TESTED