RacePro 5W-30 Premium Motor Oil 5W-30
Race Pro Products Co. Riverside, CA
Purchased in: Grewal Travel Center, Baker, CA
Date of purchase: April 29, 2011
Note:
Whereas the label on this product states "API Service SM,"
it does not display the official API Donut certifying that it meets the performance
requirements set by the API and subject to quality
testing conducted by the API's Aftermarket Audit Program
(AMAP). Test data may be consistent with the API SM Service
Classification, but this does not assure full compliance.
PETROLEUM QUALITY INSTITUTE OF AMERICA TEST PROGRAM |
|||
| PHYSICAL TESTS | Standard/ranges-b | Average-e |
RacePro 5W-30 Premium Motor Oil |
| TBN, mg KOH/g, (ASTM D2896) | 7.4 to 9.0 | 8.0 | 5.6 |
| Viscosity @ 100ºC, cSt, (ASTM D445) | 9.3 to 12.5 | 10.39 | 9.8 |
| Viscosity @ 40ºC, cSt, ASTM D445 | 55.0 to 82.0 | 60.48 | 57.6 |
| Viscosity Index (ASTM D2270) | 156 to 167 | 163 | 156 |
| Viscosity @ -30ºC mPa s (cP) (ASTM D5293) | 6,600 Max | 5,793 | 6,010 |
| Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 15 Max | 13.5 | 14.7 |
| ELEMENTAL ANALYSIS-c | |||
| Additives | |||
| Nitrogen μg/g (ASTM D-5762) | 720 to 1,000 | 860 | 540 |
| Calcium | 1,648 to 2,301 | 2,043 | 1,421 |
| Magnesium, ppm | 6 to 43 | 11 | 90 |
| Phosphorus, ppm | 600 to 800 | 772 | 647 |
| Zinc, ppm | 789 to 887 | 851 | 712 |
| Molybdenum, ppm | <1 to 226 | 93 | 9 |
| Barium, ppm | <1 | <1 | 0 |
| Boron, ppm | <1 to 246 | 84 | 3 |
| Silicon, ppm-d | 4 to 8 | 5 | 2 |
| Potassium, ppm | <1 | <1 | 0 |
| Manganese, ppm | <1 to 8 | 1 | 0 |
| Titanium, ppm | <1 | <1 | 0 |
| Sulfur, ppm | 5,000 max | 3,021 | 2,558 |
| Copper, ppm | <1 | <1 | 0 |
| Sodium, ppm | <1 to 467 | 82 | 0 |
| Vanadium, ppm | <1 | <1 | 0 |
| Contaminants | |||
| Silver, ppm | <1 | <1 | 0 |
| Aluminum, ppm | <1 to 2 | <1 | 0 |
| Chromium, ppm | <1 | <1 | 0 |
| Iron, ppm | <1 to 1 | 1 | 0 |
| Nickel, ppm | <1 | <1 | 0 |
| Lead, ppm | <1 to 1 | <1 | 0 |
| Antimony, ppm | <1 | <1 | 0 |
| Tin, ppm | 4 to 5 | 5 | 2 |
|
a- Click here for product label. b- Standards, shown in orange, are established by API, SAE and others. Ranges, shown in teal, represent the high and low data for the major brands tested. c-Test Method for metal analysis is ASTM ASTM D5185. d- Although silicon is used as an antifoam additive in lubricants, concentrations above 7ppm have been linked to contamination from abrasive material, e- Average of the 10 major brands tested. Click here for brands tested.
|
|||
