|
November 2011 |
Click Bottles Below for More
Detail |
|||||||||||
|
Test Results for 5W-30 Motor Oils API SN ILSAC GF-5 |
 |
 |
 |
 |
 |
 |
 |
|||||
| Petro-Canada Supreme | Mobil Super 5000 | Sunoco Ultra | Pennzoil | Vavoline Premium Conventional | Quaker State | Castrol GTX | ||||||
| PHYSICAL TESTS (click test for details) | Standards/ranges-a |
|||||||||||
| TBN, mg KOH/g, (ASTM D2896) |
6.1 to 8.3 |
7.4 | 7.3 | 6.3 | 8.3 | 6.1 | 7.2 | 6.3 | ||||
9.3 to
12.5 |
10.79 | 10.20 | 10.80 | 10.52 | 10.54 | 10.55 | 10.52 | |||||
| Viscosity @ 40șC, cSt, (ASTM D445) | 55.8
to 65.2 |
62.67 | 60.76 | 65.19 | 62.61 | 62.89 | 61.60 | 62.79 | ||||
| Viscosity Index (ASTM D2270) | 156 to 169 |
164 | 156 | 157 | 158 | 158 | 162 | 157 | ||||
| Viscosity @ -30șC mPa s (cP) (ASTM D5293) | 6,600 Max |
4,583 | 5,806 | 6,362 | 6,077 | 5,924 | 5,625 | 5,653 | ||||
| NOACK volatility, mass % loss, 1 hr, @ 250șC (ASTM D5800) | 15 Max |
13.0 | 13.2 | 14.6 | 14.4 | 14.4 | 14.6 | 13.7 | ||||
| ELEMENTAL ANALYSIS-b,c | ||||||||||||
| Additives | ||||||||||||
| Nitrogen μg/g (ASTM D-5762) | 599 to 990 |
939.4 | 843.4 | 662.8 | 990.4 | 659.4 | 950.8 | 599.3 | ||||
| Calcium, ppm | 1,570
to 2,460 |
2,061 | 1,952 | 1,570 | 2,408 | 1,571 | 2,021 | 1,706 | ||||
| Magnesium, ppm | 6 to
46 |
9 | 14 | 11 | 7 | 8 | 10 | 6 | ||||
| Phosphorus ,ppm | 600 to
800 |
694 | 706 | 702 | 727 | 702 | 705 | 696 | ||||
| Zinc, ppm | 766 to 868 |
769 | 792 | 777 | 868 | 776 | 791 | 772 | ||||
| Molybdenum, ppm | <1 to 269 |
81 | 1 | 1 | 269 | 2 | 117 | <1 | ||||
| Barium, ppm | <1 |
<1 | <1 | <1 | <1 | <1 | <1 | <1 | ||||
| Additive and/or other | ||||||||||||
| Boron, ppm | <1 to
237 |
224 | 2 | 2 | 109 | 3 | 214 | 2 | ||||
| Silicon, ppm | 3 to
9 |
6 | 4 | 4 | 6 | 4 | 6 | 9 | ||||
| Potassium, ppm | 9
to 17 |
11 | 17 | 9 | 10 | 9 | 9 | 9 | ||||
| Manganese, ppm | <1 |
<1 | <1 | <1 | <1 | <1 | <1 | <1 | ||||
| Titanium, ppm | <1
to 114 |
<1 | 33 | <1 | <1 | <1 | <1 | <1 | ||||
| Sulfur, ppm | 5,000 max |
2,888 | 3,000 | 2,070 | 1,845 | 1,987 | 3,315 | 2,416 | ||||
| Copper, ppm | <1 |
<1 | <1 | <1 | <1 | <1 | <1 | <1 | ||||
| Sodium, ppm | 5 to
454 |
5 | 454 | 436 | 5 | 438 | 6 | 432 | ||||
| Vanadium, ppm | <1 |
<1 | <1 | <1 | <1 | <1 | <1 | <1 | ||||
| Contaminants | ||||||||||||
| Silver, ppm | <1 |
<1 | <1 | <1 | <1 | <1 | <1 | <1 | ||||
| Aluminum, ppm | <1 to
3 |
3 | <1 | <1 | 3 | <1 | 1 | 3 | ||||
| Chromium, ppm | <1 |
<1 | <1 | <1 | <1 | <1 | <1 | <1 | ||||
| Iron, ppm | <1 to
1 |
<1 | 1 | <1 | <1 | <1 | <1 | <1 | ||||
| Nickel, ppm | <1 |
<1 | <1 | <1 | <1 | <1 | <1 | <1 | ||||
| Lead, ppm | <1 |
<1 | <1 | <1 | <1 | <1 | <1 | <1 | ||||
| Antimony, ppm | <1 |
<1 | <1 | <1 | <1 | <1 | <1 | <1 | ||||
| Tin, ppm | <1 |
<1 | <1 | <1 | <1 | <1 | <1 | <1 | ||||
a- Standards, shown in black, are established by API, SAE and others. Ranges, shown in teal, represent the high and low data for the majors shown. b-Test Method used for metal analysis is ASTM ASTM D5185. c- ASTM D5185-09 Reproducibility by Element. d- The specification of 15 max is expressed in two significant figures and therefore this result meets specification.
|
||||||||||||
| Copyright © 2011 Petroleum Quality Institute of America, LLC. | ||||||||||||