Petroleum Quality Institute of America

The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality and performance of lubricants in the marketplace.  Our mission is to serve the consumer of lubricants by reporting on the quality and integrity of lubricants in themarketplace.

 

Supporters

 

 

 
 

Wolf's Head 5W-30 API SM ILSAC GF-4

Wolf's Head Oil Co. Tampa, FL

 

 

 

 

Purchased in: Snow Shoe Truck Stop, Snow Shoe, PA

Date of purchase: January 6, 2011 

 

 

All tests conducted on this sample meet the specifications for API SM and ILSAC GF-4 5W-30 Engine oil.

 

 

 

 

PETROLEUM QUALITY INSTITUTE OF AMERICA

TEST PROGRAM
PHYSICAL TESTS Standard/ranges-b Average-e

Wolf's Head

 5W-30
 TBN, mg KOH/g, (ASTM D2896) 7.4 to 9.0 8.0 6.8
 Viscosity @ 100ºC, cSt, (ASTM D445) 9.3 to 12.5 10.39 10.49
 Viscosity @ 40ºC, cSt, ASTM D445 55.0 to 82.0 60.48 62.18
 Viscosity Index (ASTM D2270) 156 to 167 163 159
 Viscosity @ -30ºC mPa s (cP) (ASTM D5293) 6,600 Max 5,793 5,770
 Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) 15 Max 13.5 15.4 See footnote "f"
ELEMENTAL ANALYSIS-c      
Additives
    Nitrogen μg/g (ASTM D-5762) 720 to 1,000 860 920
    Calcium  1,648 to 2,301 2,043 1,852
    Magnesium, ppm  6 to 43 11 7
    Phosphorus,  ppm 600 to 800 772 697
    Zinc, ppm  789 to 887 851 766
    Molybdenum,  ppm  <1 to 226 93 44
    Barium, ppm  <1 <1 0
 
    Boron,  ppm  <1 to 246 84 229
    Silicon,  ppm-d  4 to 8 5 0
    Potassium, ppm  <1  <1 0
    Manganese, ppm  <1 to 8 1 0
    Titanium, ppm  <1 <1 0
    Sulfur, ppm  5,000 max 3,021 3,763
    Copper, ppm  <1  <1 0
    Sodium, ppm  <1 to 467 82 0
    Vanadium, ppm  <1 <1 0
Contaminants
    Silver, ppm  <1 <1 0
    Aluminum, ppm  <1 to 2 <1 1
    Chromium, ppm  <1 <1 0
    Iron, ppm  <1 to 1 1 0
    Nickel, ppm  <1 <1 0
    Lead, ppm  <1 to 1 <1 0
    Antimony, ppm  <1 <1 0
    Tin, ppm  4 to 5 5 2

a- Click here for product label.

b- Standards, shown in orange, are established by API, SAE and others. Ranges, shown in teal, represent the high and low data for the majors shown.

c-Test Method for metal analysis is ASTM ASTM D5185.

d- Although silicon is used as an antifoam additive in lubricants, concentrations above 7ppm have been linked to contamination from abrasive material,

e- Average of the 10 major brands tested. Click here for brands tested.

f- The specification of 15 max is expressed in two significant figures and therefore this result meets specification.

 

  
Wolf's Head 5W-30
The American Petroleum Institute sets forth a number of laboratory and engine tests required to meet an API SM performance specification. Although laboratory tests alone cannot be used to establish if an engine oil meets API SM, they can be used to determine if it doesn't.

What follows is a comparison of the test results for Wolf's Head 5W-30 as compared to the API SM ILSAC GF-4 requirements.

The API limits for each test are shown by the yellow bars. The test result for Wolf's Head 5W-30 are illustrated by the horizontal line.

 
Viscometrics

The viscometrics of Wolf's Head 5W-30 meets the required targets for a 5W-30 API SM (SAE J300 specification).

 
   
Volatility Phosphorus
The volatility of Wolf's Head 5W-30 meets the parameters required for an API SM ILSAC GF-4 designation.

Click here for more on Volatility.

 The phosphorus content in Wolf's Head 5W-30 meets the requirements for an API SM ILSAC GF-4 designation.

 

  
   
 

  
FRONT AND BACK LABELS FROM PRODUCT TESTED