PETROLEUM QUALITY INSTITUTE OF AMERICA TEST PROGRAM
The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality of lubricants in the marketplace. Our mission is to serve the consumer of lubricants by randomly sampling and independently testing lubricants taken from the field. Test results are posted along with the brand names on the PQIA website. This webpage provides an analysis on the brand detailed below.
The following are the test results for the sample examined.
Agip SUPER XL SAE 5W-30, API SN, ILSAC GF-5 |
||||||||||||
Test Results and Assessment: The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Category.
|
PHYSICAL TESTS (click test for details) | Standard |
Agip SUPER
XL Motor Oil Sample Test Results |
TBN, mg KOH/g, (ASTM D2896) | 8.1 | |
Viscosity @ 100ºC, cSt, (ASTM D445) | 9.3 to 12.5 | 10.44 |
Viscosity @ 40ºC, cSt, ASTM D445 | 61.44 | |
Viscosity Index (ASTM D2270) | 160 | |
Viscosity @ -30ºC mPa s (cP) (ASTM D5293) | 6,600 Max | 6,144 |
Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 15 Max-c | 15.3 |
ELEMENTAL ANALYSIS-b | ||
Additives | ||
Calcium | 2,115 | |
Magnesium | 10 | |
Phosphorus, ppm | 764 | |
Zinc, ppm | 819 | |
Molybdenum, ppm | 79 | |
Barium, ppm | <1 | |
Boron, ppm | 238 | |
Silicon, ppm | 3 | |
Potassium, ppm | <5 | |
Manganese, ppm | <1 | |
Titanium, ppm | <1 | |
Copper, ppm | <1 | |
Sodium, ppm | <5 | |
Vanadium, ppm | <1 | |
Silver, ppm | 1 | |
Aluminum, ppm | <1 | |
Chromium, ppm | <1 | |
Iron, ppm | <1 | |
Nickel, ppm | <1 | |
Lead, ppm | <1 | |
Antimony, ppm | <1 | |
Tin, ppm | <1 | |
a- Standards, shown in yellow are established by API, SAE and others. b-Test Method for metal analysis is ASTM D5185. c - This specification is expressed to two significant figures, therefore results up to 15.5 are considered on specification.
|