Petroleum Quality Institute of America

The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality and performance of lubricants in the marketplace.  Our mission is to serve the consumer of lubricants by reporting on the quality and integrity of lubricants in themarketplace.

 

Supporters

 

 

 
 

Petro-Canada Supreme 5W-30, API SN ILSAC GF-5

Petro-Canada 

 

Purchased in: Petro-Canada, 325 Stemart Blvd, Brockville, Ontario

Date of purchase: September 3, 2011

 

 

 

 

 

 

 

 

All tests conducted on this sample meet the specifications for API SN and ILSAC GF-5 5W-30 Engine oil.

 

 

 

 

 

 

PETROLEUM QUALITY INSTITUTE OF AMERICA

TEST PROGRAM
PHYSICAL TESTS Standard/ranges-b Average-e

Petro-Canada
 TBN, mg KOH/g, (ASTM D2896) 6.1 to 8.3 7.2 7.4
 Viscosity @ 100ºC, cSt, (ASTM D445) 9.3 to 12.5 10.5 10.79
 Viscosity @ 40ºC, cSt, ASTM D445 55.8 to 65.2 61.88 62.67
 Viscosity Index (ASTM D2270) 156 to 169 160 164
 Viscosity @ -30ºC mPa s (cP) (ASTM D5293) 6,600 Max 5,775 4,583
 Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) 15 Max 14.2 13.0
ELEMENTAL ANALYSIS-c      
Additives
    Nitrogen μg/g (ASTM D-5762) 599 to 990 804.2 939.4
    Calcium  1,570 to 2,460 2,051 2,061
    Magnesium, ppm  6 to 46 12 9
    Phosphorus,  ppm 600 to 800 703 694
    Zinc, ppm  766 to 868 791 769
    Molybdenum,  ppm  <1 to 269 60 81
    Barium, ppm  <1 <1 <1
 
    Boron,  ppm  <1 to 237 79 224
    Silicon,  ppm-d  3 to 9 5 6
    Potassium, ppm 9 to 17 11 11
    Manganese, ppm  <1 <1 <1
    Titanium, ppm  <1 to 114 11 <1
    Sulfur, ppm  5,000 max 2,785 2,888
    Copper, ppm  <1  <1 <1
    Sodium, ppm  5 to 454 172 5
    Vanadium, ppm  <1 <1 <1
Contaminants
    Silver, ppm  <1 <1 <1
    Aluminum, ppm  <1 to 3 1 3
    Chromium, ppm  <1 <1 <1
    Iron, ppm  <1 to 1 <1 <1
    Nickel, ppm  <1 <1 <1
    Lead, ppm  <1 <1 <1
    Antimony, ppm  <1 <1 <1
    Tin, ppm  <1 <1 <1

a- Click here for product label.

b- Standards, shown in orange, are established by API, SAE and others. Ranges, shown in teal, represent the high and low data for the 13 major brands of API SN ILSAC GF-5 tested in September 2011.

c-Test Method for metal analysis is ASTM ASTM D5185.

d- Although silicon is used as an antifoam additive in lubricants, concentrations above 7ppm have been linked to contamination from abrasive material,

e- Average of the 13 major brands of API SN ILSAC GF-5 tested in September 2011.

 

 

  
Petro-Canada 5W-30
The American Petroleum Institute sets forth a number of laboratory and engine tests required to meet an API SN ILSAC GF-5 performance specification. Although laboratory tests alone cannot be used to establish if an engine oil meets API SN, they can be used to determine if it doesn't.

The following is a comparison of the test results for the sample of Petro-Canada 5W-30 tested with the API SN ILSAC GF-5 requirements.

  
Viscometrics

The viscometrics meet the required targets for an SAE 5W-30 API (SAE J300 specification).

 
   
Volatility Phosphorus

The volatility meets the requirements for an API SN ILSAC GF-5 designation. 

 

Click here for more on Volatility.

 The phosphorus content in Petro-Canada 5W-30 meets the requirements for an API SN ILSAC GF-5 designation.

 

 

  
   
 

  
FRONT AND BACK LABELS FROM PRODUCT TESTED