Petroleum Quality Institute of America

The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality and performance of lubricants in the marketplace.  Our mission is to serve the consumer of lubricants by reporting on the quality and integrity of lubricants in themarketplace.

 

Supporters

 

 

 
 

Chevron Supreme 5W-30 API SN GF-5

Manufactured by Chevon Products Co. San Ramon, CA

 

 

 

 

 

Purchased in: Terrible Herbst, Las Vegas, NV

Date of purchase: April 29, 2011 

 

 

 

 

All tests conducted on this sample meet the specifications for API SN and ILSAC GF-5 5W-30 Engine oil.

 

 

 

 

 

 

PETROLEUM QUALITY INSTITUTE OF AMERICA

TEST PROGRAM
PHYSICAL TESTS Standard/ranges-b Average-e

Chevron Supreme
 TBN, mg KOH/g, (ASTM D2896) 7.4 to 9.0 8.0 8.6
 Viscosity @ 100ºC, cSt, (ASTM D445) 9.3 to 12.5 10.39 10.28
 Viscosity @ 40ºC, cSt, ASTM D445 55.0 to 82.0 60.48 60.08
 Viscosity Index (ASTM D2270) 156 to 167 163 160
 Viscosity @ -30ºC mPa s (cP) (ASTM D5293) 6,600 Max 5,793 5,990
 Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) 15 Max 13.5 13.8
ELEMENTAL ANALYSIS-c      
Additives
    Nitrogen μg/g (ASTM D-5762) 720 to 1,000 860 900
    Calcium  1,648 to 2,301 2,043 2,258
    Magnesium, ppm  6 to 43 11 7
    Phosphorus,  ppm 600 to 800 772 780
    Zinc, ppm  789 to 887 851 866
    Molybdenum,  ppm  <1 to 226 93 175
    Barium, ppm  <1 <1 0
 
    Boron,  ppm  <1 to 246 84 109
    Silicon,  ppm-d  4 to 8 5 6
    Potassium, ppm  <1  <1 0
    Manganese, ppm  <1 to 8 1 0
    Titanium, ppm  <1 <1 0
    Sulfur, ppm  5,000 max 3,021 2,035
    Copper, ppm  <1  <1 0
    Sodium, ppm  <1 to 467 82 3
    Vanadium, ppm  <1 <1 0
Contaminants
    Silver, ppm  <1 <1 0
    Aluminum, ppm  <1 to 2 <1 4
    Chromium, ppm  <1 <1 0
    Iron, ppm  <1 to 1 1 0
    Nickel, ppm  <1 <1 0
    Lead, ppm  <1 to 1 <1 0
    Antimony, ppm  <1 <1 0
    Tin, ppm  4 to 5 5 2

a- Click here for product label.

b- Standards, shown in orange, are established by API, SAE and others. Ranges, shown in teal, represent the high and low data for the major brands tested.

c-Test Method for metal analysis is ASTM ASTM D5185.

d- Although silicon is used as an antifoam additive in lubricants, concentrations above 7ppm have been linked to contamination from abrasive material,

e- Average of the 10 major brands tested. Click here for brands tested.

 

 

  
Chevron Supreme 5W-30
The American Petroleum Institute sets forth a number of laboratory and engine tests required to meet an API SN performance specification. Although laboratory tests alone cannot be used to establish if an engine oil meets API SN, they can be used to determine if it doesn't.

What follows is a comparison of the test results for Chevron Supreme 5W-30 as compared to the API SN ILSAC GF-5 requirements.

The API limits for each test are shown by the yellow bars. The test result for Chevron Supreme 5W-30 are illustrated by the horizontal line.

 
Viscometrics

The viscometrics of Chevron Supreme 5W-30 meets the required targets for a 5W-30 API SN (SAE J300 specification).

 
   
Volatility Phosphorus
The volatility of Chevron Supreme 5W-30 meets the parameters required for an API SN ILSAC GF-5 designation.

Click here for more on Volatility.

 The phosphorus content in Chevron Supreme 5W-30 meets the requirements for an API SN ILSAC GF-5 designation.

 

  
   
 

  
FRONT AND BACK LABELS FROM PRODUCT TESTED