PETROLEUM QUALITY INSTITUTE OF AMERICA TEST PROGRAM
The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality of lubricants in the marketplace. Our mission is to serve the consumer of lubricants by randomly sampling and independently testing lubricants taken from the field. Test results are posted along with the brand names on the PQIA website. Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't.
| Pronto Supreme API SN, ILSAC GF-5, SAE 0W-20 motor oil. | |
 CLICK FOR LARGER IMAGE |
Pronto Supreme API SN/GF-5, SAE 0W-20 motor oil Distributed by National Pronto Associates, Grapevine, TX Purchased at: Aliquippa, PA Date of purchase: 2/7/2014
The results of the tests conducted on this sample meet the requirements of an API SN, ILSAC GF-5, SAE 0W-20 motor oil.
|
| PHYSICAL TESTS (click test for details) | Standard | PRONTO SUPREME | |
| TBN, mg KOH/g, (ASTM D2896) | 7.81 | ||
| Viscosity @ 100ºC, cSt, (ASTM D445) | 5.6 to <9.3 | 8.395 | |
| Viscosity @ 40ºC, cSt, ASTM D445 | 44.3 | ||
| Viscosity Index (ASTM D2270) | 169 | ||
| Viscosity @ -35ºC mPa s (cP) (ASTM D5293) | 6,200 Max | 5,657 | |
| Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 15 Max -c | 13.1 | |
| ELEMENTAL ANALYSIS-b | |||
| Additives | |||
| Calcium | 2,163 | ||
| Magnesium | 15 | ||
| Phosphorus, ppm | 600 to 800 | 774 | |
| Zinc, ppm | 827 | ||
| Molybdenum, ppm | 81 | ||
| Barium, ppm | <1 | ||
| Boron, ppm | 238 | ||
| Silicon, ppm | 6 | ||
| Potassium, ppm | <5 | ||
| Manganese, ppm | <1 | ||
| Titanium, ppm | <1 | ||
| Copper, ppm | <1 | ||
| Sodium, ppm | <1 | ||
| Vanadium, ppm | <1 | ||
| Contaminants | |||
| Silver, ppm | <1 | ||
| Aluminum, ppm | 2 | ||
| Chromium, ppm | <1 | ||
| Iron, ppm | <1 | ||
| Nickel, ppm | <1 | ||
| Lead, ppm | <1 | ||
| Antimony, ppm | <1 | ||
| Tin, ppm | <1 | ||
|
a- Standards, shown in yellow are established by API, SAE and others. b-Test Method for metal analysis is ASTM ASTM D5185. c - This specification is expressed to two significant figures, therefore results up to 15.5 are considered on specification.
|
|||
